6.1 |
|
6.2 |
|
6.3 |
|
6.4 |
|
6.5 |
6.1 DRYLAND
PEG WEEDER |
|
|
|
Features: The
dryland weeder (peg type)
is manually operated weeder suitable for operation
between the crop rows. It consists of a roller, which has two mild steel
discs joined by mild steel rods. The small diamonds shaped pegs are welded on
the rods in a staggered fashion. The complete roller assembly is made of mild
steel. The V shaped blade follows the roller assembly and is mounted on the
arms... The height of the blade can be adjusted according to the working
depth. The arms are joined to the handle assembly, which is made from thin
walled pipes. The height of the handle can also be adjusted according to the
requirement of the operator. For removing weeds it is repeatedly pushed and
pulled in between the crop rows in the standing position. The diamonds shaped
pegs penetrate into the soil and the rolling action pulverize the soil. The
blade in the push mode penetrates into the soil and cuts or uproots the
weeds. |
|
Specifications: Overall
length (mm) Overall
width (mm) Overall
height (mm) Diameter
of the peg wheel (mm) Working
width (mm) Weight
(kg) |
: 1680 : 590 : 1080 : 220 : 150 : 8-10 |
Uses: The
weeder is used for removing weeds in vegetable
gardens, basins of orchard trees and Vineyard plantations. It is also used for
breaking the soil crust and creation of soil mulch. Cost of Machine: Rs.800/- |
|
|
|
|
Features: The
wheel hand hoe is a widely accepted weeding tool for doing weeding and interculture in row crops. It is a long handled tools
operated by pushing and pulling action.
The number of wheel varies from one to two and the diameter depends
upon the design. The frame has provision to accommodated different types of
soil working tools such as, straight blade, reversible blades, sweeps, V
-blade, tyne cultivator, pronged hoe, miniature
furrower, spike harrow (rake) etc. It can be operated by a single
person. All the soil working
components of the tool are made from medium carbon steel and hardened to
40-45 HRC. For operation, the working
depth of the tool and handle height is adjusted and the wheel hoe is operated
by repeated push- pull action which allows the soil working components to
penetrate into the soil and cut/uproot the weeds in between the crop rows.
With this action, the weeds also get buried in the soil. |
|
Specifications: Overall
length (mm) : Overall
width (mm) : Overall
height (mm) : Number
of tynes : Wheel
diameter (mm) : Working
depth (mm) : Weight
(kg) : |
:
1400- 1500 :
450- 500 :
800- 1000 :
3 No. :
200- 600 :
Upto 60 :
4- 12 |
Uses:
It is used for weeding and intercultural
operations in vegetables and other crops sown in rows. Cost of Machine : Rs.1200/- |
|
|
|
|
Features: The
weeder consists of two rotors, float, frame and
handle. The rotors are cone frustum in shape, smooth and serrated strips are
welded on the surface along its length. The rotors are mounted in tandem with
opposite orientation. The float, rotors and handle are joined to the frame.
The float controls working depth and does not allow rotor assembly to sink in
the puddle. The cono weeder
is operated by pushing action. The orientation of rotors create a back and
forth movement in the top |
|
Specifications: Width (mm) Height
(mm) Type Weight
(kg) Number
of rotors Capacity
(ha/day)' |
: 370 : 1400 : Manually operated : 5 to 6 : 2 : 0.18 |
Uses: The
cono weeder is used to
remove weeds between rows of paddy crop efficiently. It is easy to
operate, and does not sink in the puddle. Cost of Machine : Rs.1500/- |
6.4
POWER TILLER SWEEP |
|
|
|
Features: This
machine has been specially designed for operation with a power tiller of 5-8
hp (4.5-6.0 kW) to perform interculture operations
in standing crop in soybean, sorghum, bengal gram,
pigeon pea etc where the row spacing is wide enough for the power tiller to
pass without damaging the plants. A depth control wheel is provided at its
rear for maintaining uniform depth of operation. It is suitable for medium and light soils.
It is provided with a ground wheel for operating the metering mechanism. Some
of its major components are the main frame with hitch system, handle, and
drive wheel and tynes. |
|
Specifications: Length
(mm) Width
(mm) Height
(mm) Weight
(kg) Working
width (mm) Working
depth (mm) Weeding
efficiency (%) Operating
speed (km/h) Fuel
consumption (l/h) Field
capacity (ha/h) Power
Source(hp/kW) |
: 930 : 1580 : 1370 : 40 : 1350 : 50 : 50-60 : 1.8-2.5 : 0.7-1.0 : 0.18-0.25 : 5-8/4.5-6.0, engine |
Uses:
It
is used for performing interculture operations in
standing crop in soybean, sorghum, Cost
of Machine : Rs 15,000/- |
6.5
SELF-PROPELLED POWER WEEDER |
|
Features: A diesel engine
operates the weeder. The engine power is
transmitted to ground wheels through V belt-pulley. A tail wheel is provided
at the rear to maintain the operating depth. Weeding is done by the rotary
weeding attachment. The rotary weeder consists of
three rows of discs mounted with 6 numbers of curved blades in opposite
directions alternatively in each disc. These blades when rotating enable
cutting and mulching the soil. The width of coverage of the rotary tiller is Specification: |
|
Type Overall dimensions(LxWXH) Weight Capacity Power requirement(hp/kW)
|
: Self
propelled : 2400
x 1750 x : : 1 - : 3-5/2.25-3.75 Diesel/petrol engine
|
Uses:
It is used for weeding between rows of crops like tapioca, cotton, sugarcane, maize, tomato and pulses having
row spacing more than
Cost of Machine: Rs.60,000-70,000/-