6.0 INTERCULTURE EQUIPMENT
6.1 WHEEL HAND HOE
|
|
Features:
The wheel hand hoe is a widely accepted weeding tool for weeding
and interculture in row crops. It is a long handled tools operated
by push and pull action. The number of wheel varies from one to
two and the diameter depends upon the design. The frame has got
provision to accommodate different types of soil working tools
such as straight blade, reversible blades, sweeps, V -blade, tine
cultivator, pronged hoe, miniature furrower, spike harrow (rake)
etc. which can be operated by a single person. All the soil
working components of the tool are made from medium carbon steel
and hardened to 40-45 HRC. For operation, the working depth of
the tool and handle height is adjusted and the wheel hoe is
operated by repeated push-pull action which allows the soil
working components to penetrate into the soil and cut/uproot the
weeds in between the crop rows. With this action, the weeds also
get buried in the soil. The wheel hoes are available in various
designs and sizes. |
Specifications
Overall length (mm) :
Overall width (mm) :
Overall height (mm) :
Number of tynes :
Wheel diameter (mm) :
Working depth (mm) :
Weight (kg) : |
: 1400- 1500
: 450- 500
: 800- 1000
: 3 Nos
: 200- 600
: Upto 60
: 4- 12 |
Uses:
For weeding and intercultural operation in vegetables and other
crops sown in rows.
Cost of Machine : Rs.800/-
TOP |
6.2 CONO WEEDER
|
|
Features:
The weeder consists of two rotors, float, frame and handle. The
rotors are cone frustum in shape, smooth and serrated strips are
welded on the surface along its length. The rotors are mounted in
tandem with opposite orientation. The float, rotors and handle are
joined to the frame. The float controls working depth and does not
allow rotor assembly to sink in the puddle. The cono weeder is
operated by pushing action. The orientation of rotors create a
back and forth movement in the top 3 cm of soil and uproots the
weeds.
|
Specifications:
Width (mm)
Height (mm)
Type
Weight (kg)
Number of rotors
Capacity (ha/day)'
|
: 370
: 1400
: Manually operated
: 5 to 6
: 2
: 0.18
|
Uses:
The cono weeder is used to remove weeds between rows of paddy crop
efficiently. It is easy to operate, and does not sink in the
puddle.
Cost of Machine : Rs.800/-
TOP |
6.3 SELF-PROPELLED POWER WEEDER |
|
|
Features:
The self propelled weeder consists of a box section chassis, 3-hp
petrol -start- kerosene run engine, transmission system, drive
wheels, tool mounting bar of 70 x 70 mm size. The wheel tread
(spacing between two wheels) can be adjusted from 400 to 650 mm to
suit the row to- row spacing of different crops. The V -shaped
weeding sweeps of 150 and 200 mm size are fitted on tynes. These
tynes are mounted on the tool bar with clamps. The tynes are
raised or lowered for adjusting the depth of operation and locked
in position by the clamp. The spacing between sweeps can be is
easily adjusted by sliding the tynes on tool mounting bar to suit
the crop row spacing. Power from engine is transmitted to gearbox
through V –belt and pulleys. While transportation, the tynes are
adjusted to the raised position so they do not dig into the
ground. The tynes are adjusted according to the row spacing of the
crop and depth of operation. |
|
Specifications
Tool mounting bar (mm) : 70x70
Wheel tread spacing(mm) : 400 to 650
Sweeps(mm) : 150 to
200
Power requirement(h.p./kW) : 3/2.25,
petrol-start-kerosene run engine
Uses:
The CIAE self-propelled Power Weeder is suitable for weeding and
intercultural operations in upland row crops like groundnut,
maize, soybean, pigeon pea, etc. sown at row-to-row spacing of
more than 30 cm.
Cost of Machine : Rs.80,000/-
TOP |
6.4 POWER ROTARY WEEDER |
|
Features:
It is a self propelled weeder powered by a single cylinder air
cooled diesel engine. It consists of a rotary shaft on which tynes
are mounted. It is a walk behind machine with 180 degree revolving
and height adjustable handle bar. It has provision for adjusting
tilling width and depth. It is available in eight different
attachments along with the weeder.
|
Specifications:
Tilling width, (mm)
Tilling depth, (mm)
Number of tynes
Rotary tilling speed, (rpm)
Axle width, (mm)
Weight, (kg) |
: 209 to 640
: 50 to 60
: 14
: 700
: 327
: 110 (without rotary)
|
Uses:
It can be used for land preparation, weeding and erthing up
operation.
Cost of Machine :
Rs 60,000/-
TOP |
6.5 BRUSH CUTTER |
|
Features:
It consists of a long shaft, two handles, rotar blades and petrol
run engine it is provided with three types of cutting blades. The 26
to 50 cc brush cutter has fuel-efficient engine. The company caters
fixed blade cutter for regular cutting dry grass, sugarcane trash
and detachable circular blade is available for cutting thick wild
grass. The nylon rope cutter to cut grass on stony or uneven land
surface is also provided. It also has an attachment for doing
interculture operation and has a cushioned belt for easy mounting on
the body. It is available with single and double handles. It is
provided with special compensating jet carburetor fitted to its
engine. |
Specification:
Type of engine
Displacement in cc
Power output in (hp/ kW)
Man power required |
: Two stroke petrol engine
: 26-50
: 1.00/0.75
: one person |
Uses:
It is used for cutting dry grass, thick wild grass, intercultural
operations etc.
Cost of machine :
Rs. 25,000/-
TOP |
|