4.0
TILLAGE IMPLEMENTS
4.1
M.B.PLOUGH
Features:
It is tractor operated implement and it consists of share point, share,
mouldboard, landside, frog, shank, frame and hitch system. The share point
is of bar type and is made from high carbon steel or low alloy steel. The
share is also made from high carbon steel or low alloy steel. Both are
hardened and tempered to suitable hardness (about 45 ARC). The working of
the plough is controlled by hydraulic system of the tractor. Mould board
plough is a primary tillage implement.
Specification:
No. Of bottom : 2 - 4
Length (mm) : 1778-2392
Width (mm) : 889-1194
Height (mm) : 1092-1092
Weight (kg) : 253-386
TOP
Capacity (ha/day) : 1.5-2.0
Power requirement(hp/kW) : 30-40 /22.5-30,
tractor |
Uses:
This is used for primary tillage operations. It cuts trash and buries
it completely. It is also used for turning green manure crop for
decaying under the soil, which adds humus to the soil. It is also used
for turning and mixing compost, farmyard manure or lime into the
soil. |
Cost
(Rs) : 25,000-40,000 |
4.2
REVERSIBLE TWO BOTTOM M.B PLOUGH |
|
Features:
The two bottom reversible plough is a unique implement, which is
directly mounted to the tractor. This is a hydraulically
/mechanically operated basic implement for preparation of land. It is
very useful for primary tillage in hard and dry trashy land. The
Mould Board retain their mirror finish at all time contributing to
well turned furrows. The plough has special wear resistant steel
bottoms with bar points for toughest ploughing jobs. Bar point bottom
ensures longer life as it can be extended or reversed. The m.b.
bottom reversing mechanism is operated by a lever provided on the
distributor. When the implement is hitched, plough bottom is free to
rotate 180 degree along the axis of the hollow shaft. |
Specifications
Length
(mm)
Width
(mm)
Weight
(kg)
Plough
bottom
Reversing mechanism
Area
covered (ha / h)
Field
efficiency (%) |
:
320
:
367 (at front)
:
260
:
Four (Two on each side)
:
Hydraulically/ Mechanically operated
TOP
:
0.20 to 0.25
:
90 |
Power
requirement (hp/kW) : 65/48.75
& above tractor |
Uses:
It is used for primary tillage operation and does not leave any dead
furrow or
uneven and sunken spots in the field. It works on both left and
right side and the plough bottom can be reversed with the help of a
mechanically or hydraulically operated lever.
Cost: Rs 60,000- 1,20,000/-
4.3
DISC PLOUGH
Features:
The plough consists of common main frame, disc beam assemblies,
rockshaft category-1 or category-2, a heave spring loaded furrow
wheel and a gauge wheel. In some model disc plough is designed to
operate as 2, 3 or 4 bottoms, by adding or removing sub beams the
sub beam assemblies according to requirement. The disc angle ranges
from 40-450 to obtain the desired width of cut and the
tilt angle ranges from 15-25 0 for penetration. Disc
plough is used for primary tillage and it is specially used where
M.B. Plough is not useful such as hard and dry soil.
Specification:
Number of furrows : 2-4
Disc size (mm) : 600-800
Length (mm) :
1180-2362
Width (mm) : 889-1194
Height (mm) :
1092-1118
Width of cut per disc (mm) : 200-300
TOP
Adjustable working width (mm) : 600-1200
Working depth (mm) : up to 300
Weight (kg) : 236-376 |
Power requirement (mm) : 25-50, tractor
Uses:
Disc plough is used for primary tillage and is especially useful
in hard and dry, trashy, stony or stumpy land conditions and in
soil where scoring is a major problem |
. Cost
(Rs) : 30,000-45,000 |
|
4.3
DISC PLOUGH
Features:
The plough consists of common main frame, disc beam assemblies, rockshaft
category-1 or category-2, a heave spring loaded furrow wheel and a gauge
wheel. In some model disc plough is designed to operate as 2, 3 or 4
bottoms, by adding or removing sub beams
4.4
TYNE TYPE CULTIVATOR
Features:
Cultivator consists of a frame, tynes (fixed or spring loaded)
having reversible shovels and 3-pont hitch system. Cultivators are
primarily used for intercultural operation after the crop has come up a
few centimetres above the ground. But cultivator is also used for opening
the land, preparing the seed bed and sowing of the seeds as well
cultivators for the secondary tillage are available as animal drawn and
tractor drawn. In medium and light soil duck foot type cultivators are
also used for primary tillage operation.
Specification:
Duck foot type cultivator
Number of sweep
: 5-7
Length
(mm) :
1980-2310
Width
(mm) :
839-1150
Height (mm)
: 1000-1050
Weight
(kg) :
200-300
Power requirement (hp/kW) :
25-50/18.75-37.5, tractor
TOP
Shovel type cultivator
Number of tynes
: 7-11
Cutting width (mm) :
1500-2400
Cutting depth (mm) :
175-225
Weight
(kg) :
127-350
Power requirement (hp/kW) :
25-60/18.75- 45, tractor |
Uses:
Duck foot type cultivator is used for tillage operation, destruction
of weeds and retention of soil moisture. Shovel type cultivator is
used for seed bed preparation, also used for intercultural operation
by adjusting the tynes as per row spacing. |
Cost (Rs) : 15,000-25,000 |
4.5 DISC HARROW
Features:
The tractor mounted disc harrow consists of two gangs of discs mounted one
behind the other. The disc on front gang throws soil outwards and the rear
gang inward. Therefore, no soil remains uncut by the offset disc harrow.
Disc harrow is secondary tillage implement. It is used after the primary
tillage. It is used to break the clods developed during primary tillage
operation.
Specification:
Length (mm) :
1980-2260
Width (mm) :
1150-1900
Height (mm) :
1143-1350
Number of discs :
10-16
Diameter of discs (mm) : 457-660
Pitch of discs :
228-280
Weight (kg) :
330-490
TOP
Capacity (ha/day) :
2.5
Power requirement (hp/kW) :
20-60/15-45, tractor |
Uses:
It is suitable for secondary tillage operation for breaking clods and
preparing seed bed for sowing purpose. |
Cost (Rs) : 25,000-60,000 |
4.6
DUCKFOOT CULTIVATOR
|
|
Features:
The duckfoot cultivator consists of a box type steel rectangular
frame, rigid tines and sweeps. The sweeps are triangular in shape
similar to foot of duck, hence called duckfoot cultivator. The sweeps
are made from old leaf spring steel and fixed to tines with fasteners,
which makes them replaceable after being worn out or becoming dull.
The tines are made of mild steel flat and forged to shape. It is a
tractor-mounted implement and depth of operation is controlled by
hydraulic system. The sweep cultivator is popular in black cotton
soils. This cultivator is mostly used in hard soils for shallow
ploughing.
Specification:
Number
of sweeps : 5,7,9
Length
(mm) : 1980-2810:
Width
(mm) : 830-1150
Height
(mm) : 1000-1050
Weight
(Kg) : 200 -300
TOP
Power
requirement (hp/kW) : 25-50/18.75-37.5, tractor |
Uses:
Used for primary tillage operation, destruction of weeds and retention
of soil moisture
Cost of Machine : Rs.25,000/- |
4.7
ROTAVATOR
Features:
It consists of a steel frame, 3-point hitch system, a rotary shaft on
which blades are mounted, power transmission system and a gearbox. The
blades are of L-shape, made from medium carbon steel or alloy steel,
hardened and tempered to suitable hardness It uses the power from
tractor PTO. Rotavator is used as both primary and secondary tillage
operations. A good seedbed and pulverization of the soil is achieved
in a single pass of the rotavator. It is used in both dry land and wet
land conditions. It is also suitable for incorporating straw and
manure in the field. The power requirement will vary depending upon
the width of the rotavator.
Specification:
Weight (kg) : 230-310
Working width (mm) : 1200-1720
Working depth (mm) : 80-100
Rotor speed (rpm) : 210-240
Capacity (ha/hr) : 0.38-0.5
TOP
Power Source : 35-65 hp tractor
(depending upon size of
rotavator) |
Uses:
It is used as both primary as well as secondary tillage operations. It
is also useful for puddling the field before paddy transplanting. |
Cost (Rs) : 70,000-1,00,000 |
4.8 CULTIPACKER
Features:
The implement consists of number of cast iron V- shaped rollers mounted on
three axles. The implement can be operated either with one or three gangs.
Sometimes it can be attached behind disc harrow (trailing type) to affect
compaction for moisture conservation. It is trailed type implement used
for breaking the clods and compaction of soil and thereby conserving the
moisture.
Specification:
Gang span (mm) : 1425
Number of gangs : 1-3
Working width with 3 gangs (mm) : 3200-4100
Number of rollers in each gang : 14
Roller width (mm) : 102
TOP
Roller diameter (mm) : 46
Roller weight (kg) : 26
Weight (single gang) (kg) : 450
Total weight (kg) :
1350
Power Requirement(hp/kW) : 35/26.25,
tractor |
Uses:
Breaking of clods and packing of soil and thereby conserving moisture.
|
Cost (Rs) : 60,000-1,50,000 |
4.9 POST-HOLE DIGGER
Features:
It consists of a frame, three point hitch system and an auger. For
operation of auger, it gets drive from tractor PTO shaft. The diameter
and the depth of hole can be changed by changing auger assembly. It is
used to dig pits for planting trees as well as digging pits for
fencing purpose.
|
Specification:
Field capacity (pits/h) : 12
Size of the augers (mm) : 200, 250, 300
Cost of operation (Rs./pit) : 12-15
Power Source(hp/kW) : 35 /26.25, tractor
|
Uses:
TOP
Used for digging holes for plantation/horticulture crops. Also used to
dig holes for farm fencing.
|
Cost (Rs) : 70,000-1,25,000 |
|