6.0 INTERCULTURE EQUIPMENT
6.1 WHEEL HAND HOE |
|
Features:
The wheel hand hoe is a widely accepted weeding tool for doing weeding
in row crops. It is a long handled tools operated by pushing and
pulling action. The number of wheel varies from one to two and the
diameter depends upon the design. The frame has provision to
accommodated different types of soil working tools such as, straight
blade, reversible blades, sweeps, V -blade, tine cultivator, pronged
hoe, miniature furrower, spike harrow (rake) etc. It can be operated
by a single person. All the soil working components of the tool are
made from medium carbon steel and hardened to 40-45 HRC. For
operation, the working depth of the tool and handle height is adjusted
and the wheel hoe is operated by repeated push- pull action which
allows the soil working components to penetrate into the soil and
cut/uproot the weeds in between the crop rows and also bury the weeds.
|
Specifications:
Overall length (mm) :
Overall width (mm) :
Overall height (mm) :
Number of tynes :
Wheel diameter (mm) :
Working depth (mm) :
Weight (kg) |
: 1400- 1500
: 450- 500
: 800- 1000
: 3 Nos
: 200- 600
: Upto 60
TOP
: 4- 12 |
Uses:
For weeding and intercultural operations in vegetables and other crops
sown in rows. It is used in pushing and pulling mode for removing
weeds. Some of the wheel hand hoes have provision for adjusting the
handle height to suit people of different statures.
Cost of Machine : Rs.1200/- |
6.2
CONO WEEDER
Features:
The weeder consists of two rotors, float, frame and handle. The rotors
are cone frustum in shape, smooth and serrated strips are welded on
the surface along its length. The rotors are mounted in tandem with
opposite orientation. The float, rotors and handle are joined to the
frame. The float controls working depth and does not allow rotor
assembly to sink in the puddle. The cono weeder is operated by pushing
action. The orientation of rotors create a back and forth movement in
the top
3 cm
of soil and thus uproots weeds. |
Specification:
Width (mm) : 370
Height (mm) : 1400
Type : Manually
operated
Weight : 5 to 6
Number of rotors : 2
Capacity (ha/day) : 0.18
TOP
Power Requirement : One person |
Uses:
The cono weeder is used to remove weeds between rows of paddy crop
efficiently. It is easy to operate and does not sink into the puddle. |
Cost
(Rs) : 1500-2000 |
6.3 SELF-PROPELLED POWER WEEDER
Features:
It consists of a frame on which tool bar, furrow openers, engine,
handles having breaks, clutch and two steel wheels are fixed. It is a
self- propelled type power weeder. It is run by 3hp/2.35kw
petrol-start, kerosene-run engine. The CIAE self-propelled power
weeder is suitable for weeding and intercultural operations in upland
row crops like groundnut, maize, soybean, pigeon pea etc. sown at row
to row spacing of more than
30 cm.
|
Specification:
Suitability for use in :
Sugarcane, Cotton,
Maize, Tapioca,
Banana, Coconut etc.
Working width, mm : 350-370
Field Capacity, (ha/h.) :
i.
Weeding : 0.06
ii.
Earthing : 0.14
Power source(hp/kW) : 3/2.35,
engine
TOP
|
Uses:
It is used for weeding and earthing operations in standing
crops |
Cost (Rs) : 80,000 |
|