6.0
INTERCULTURE EQUIPMENT
6.1
CONO WEEDER
Features:
The weeder consists of two rotors, float, frame and handle. The rotors
are cone frustum in shape, smooth and serrated strips are welded on
the surface along its length. The rotors are mounted in tandem with
opposite orientation. The float, rotors and handle are joined to the
frame. The float controls working depth and does not allow rotor
assembly to sink in the puddle. The cono weeder is operated by pushing
action. The orientation of rotors create a back and forth movement in
the top
3 cm
of soil and thus uproots weeds.
|
Specification:
Width (mm) : 370
Height (mm) : 1400
Type :
Manually operated
Weight : 5 to 6
Number of rotors : 2
Capacity (ha/day) : 0.18
TOP
Power Requirement : One person |
Uses:
The cono weeder is used to remove weeds between rows of paddy crop
efficiently. It is easy to operate and does not sink into the puddle. |
Cost
(Rs) : 1500-2000
|
6.2 SELF-PROPELLED POWER WEEDER
Features:
It consists of a frame on which tool bar, furrow openers, engine,
handles having breaks, clutch and two steel wheels are fixed. It is a
self- propelled type power weeder. It is run by 3hp/2.35kw
petrol-start, kerosene-run engine. The CIAE self-propelled power
weeder is suitable for weeding and intercultural operations in upland
row crops like groundnut, maize, soybean, pigeon pea etc. sown at row
to row spacing of more than
30 cm.
|
Specification:
Suitability for use in : Sugarcane,
Cotton,
Maize, Tapioca, Banana, Coconut etc.
Working width, mm : 350-370
Field Capacity, (ha/h.) :
i.
Weeding : 0.06
ii.
Earthing : 0.14
Power source(hp/kW) : 3/2.35, engine
TOP
|
Uses:
It is used for weeding and earthing operations in standing crops. The
engine can be used for pumping water or for operating a thresher. In
this a seat can be attached at the rear for the person for sitting.
The tynes can be easily adjusted and raised and lowered depending upon
the requirement.
|
Cost (Rs) : 80,000 |
|