3.0 LAND DEVELOPMENT EQUIPMENT
3.1
TRACTOR DRAWN LEVELLER
|
|
Features
The leveler consists of frame, 3-point linkage, cutting
or scraping blade, and thick curved sheet closed from sides to form a
bucket. The scraping blade is made from medium carbon steel or low
alloy steel, hardened and tempered to about 42 HRC. The blade is
joined to the curved sheet with fasteners and can be replaced after
being worn out or becoming dull. The working depth of the implement is
controlled by hydraulic system of the tractor.
|
Specifications: |
|
Length( mm) |
: 1840 |
Width (mm) |
: 700 |
Height (mm) |
: 700 |
Size of Blade (mm)
-Length
-Width
-Thickness |
: 1830
: 75
; 8 |
Weight (kg) |
: 90 |
Power requirement (hp/kW) :
35/26.25, tractor
Uses:
Leveling of fields and pulling or pushing loosened soil
from one place to other. |
Approx Cost: Rs. 20,000
TOP |
3.1
TRACTOR DRAWN LEVELLER
|
|
Features
The leveler consists of frame, 3-point linkage, cutting or scraping
blade, and thick curved sheet closed from sides to form a bucket. The
scraping blade is made from medium carbon steel or low alloy steel,
hardened and tempered to about 42 HRC. The blade is joined to the
curved sheet with fasteners and can be replaced after being worn out
or becoming dull. The working depth of the implement is controlled by
hydraulic system of the tractor.
|
Specifications: |
|
Length( mm) |
: 1840 |
Width (mm) |
: 700 |
Height (mm) |
: 700 |
Size of Blade (mm)
-Length
-Width
-Thickness |
: 1830
: 75
; 8 |
Weight (kg) |
: 90 |
Power requirement (hp/kW) : 35/26.25, tractor
Uses:
Leveling of fields and pulling or pushing loosened soil
from one place to other |
Approx Cost: Rs. 20,000
TOP |
3.3 SUB-SOILER
|
Features:
It consists of beam made of high carbon steel, beam supports which are
flanged at upper and lower edges for rigidity, hollow steel adaptor
welded to the bottom end of the beam to accommodates share base having
square section, share plate made from high carbon steel and shank
drilled and counter bored for set board which secures the base in the
adaptor. Share plate is made from high carbon steel, hardened and
tempered to suitable hardness. Two symmetrically located bolt holes
allow reversibility of share. The working depth of the sub-soiler is
controlled by hydraulic system and linkage of tractor.
Specifications:
Length
(mm) : 600
Width (mm)
: 49
|
Height (mm) |
: 1325 |
Maximum working depth (mm) |
: 535 |
Weight (kg) |
: 62 |
Power requirement(hp/kW) |
: 55/41.25 tractor |
|
|
|
Uses:
It is used to break hardpan of the soil, loosening of the soil and
helps the water to seep into the soil for improving drainage. A mole
ball can be attached to create a small tunnel in the soil, which
serves as drainage channel for water
Cost of Machine : Rs.20,000/-
TOP
|
|