3.0 LAND DEVELOPMENT EQUIPMENT
| 3.1 Terrace Blade | 3.2 Sub-Soiler |
.
|
Features: Terrace blade attached to tractor with the 3-point linkage system and is hydraulically controlled. It consist of replaceable blades attached to curved steel body, side wings and indexing arrangement for tilting and angling of the blade. The blade has provision of reversing back for filling |
|
Specification: Blade length (mm) : 1950 – 2458 Height (mm) : 978 Blade offset (mm) : 305 TOP Forward angular adjustment (deg) : 00, 150, 300 and 450 RH to LH Reverse angular adjustment (deg) : 00, 150, 300 and 450 RH to LH Weight (kg) : 210-260 Power requirement (hp/kW) : 35-50/26.25-37.5, tractor |
|
Uses: The terrace blade is used for grading, leveling of fields, filling of depressions and smoothening of field for irrigation. |
|
Cost (Rs): 30,000-40,00 |
Features:
It consists of a beam made of high carbon steel, beam supports which are flanged at upper and lower edges for rigidity, hollow still adaptor welded to bottom end of the beam to accommodate the share base, share base having square section, share plate made from high carbon steel and shank drilled and counter bored for set board which secures the base in the adaptor. Sub-soiler is used where land is not cultivated from many years. It is used to break the hard pan. It breaks the subsoil. It takes depth up to 60 cm.
|
Specification: Length (mm) : 600 Width (mm) : 490 Height (mm) : 1325 Maximum working depth (mm) : 535-600 Weight (kg) : 62-125 Power Requirement(hp/kW) : 55/41.25 and above TOP |
|
Uses: It is used to break hard pan of the soil and helps the water to seep in to the soil for improving drainage. A mole ball can be attached to create a small tunnel in the soil, which serves as drainage channel for water. |
|
Cost (Rs) : 20,000-60,000 |