4.0 TILLAGE
IMPLEMENTS
4.1
MOULD BOARD PLOUGH |
|
Features:
It is a tractor-operated
implement and consists of share point, share, mould board,
landslide, frog, shank, frame and hitch system. The share point
is of bar type and is made from high carbon steel or low alloy
steel. The share is also made from high carbon steel or low
alloy steel. Both are hardened and tempered to suitable hardness
(about 45 HRC). The working of the plough is controlled by
hydraulic system and three-point linkage. Its bar-point makes it
suitable to break hardpan of the soil. |
Specifications:
Length (mm)
:
Width
(mm) :
Height
(mm) :
Weight
(kg) :
Speed of operation
(Km/h)
:
Area covered (ha /
h) :
Field efficiency (%) :
Power required
(hp/kW) : |
1778
889
1092
253
3-4
0.35
70-80
45/33.75, tractor
|
Uses:
Ploughs are used for
primary tillage operations. It cuts trash and buries it
completely. It is also used for turning green manure crop for
decaying under the soil, which adds humus to the soil. Compost,
farmyard manure or lime when spread in the field, the mould
board plough is used for turning and mixing these materials in
the soil.
Cost of Machine :
Rs.40,000/-
TOP |
|
4.2
REVERSIBLE
TWO BOTTOM M.B. PLOUGH |
|
Features:
The two furrow
reversible mould board plough is a unique implement, which is
directly mounted to the tractor. This is a mechanically/
hydraulically operated basic implement for preparation of land.
It is very useful for primary tillage in hard and dry trashy
land. The mould board retains their mirror finish at all time
contributing to well turned pulverized furrows.
The plough has special wear resistant steel bottoms with
bar points for toughest ploughing jobs. Bar point bottom
ensures longer life as it can be extended or reversed. The
reverse mechanism is operated by a lever provided on the
distributor. When the implement is hitched plough bottom is
free to rotate 180 degree along the axis of the hollow shaft. |
Specifications:
Length
(mm) :
Width
(mm) :
Weight
(kg) :
Plough
bottom :
Reversing
mechanism :
Speed of operation
(Km/h) :
Area covered (ha /
h) :
Field efficiency
(%) :
Power required(hp/kW)
: |
320
367
260
Four (Two on each
side)
Mechanically
/Hydraulically operated
3 to 4
0.20 to 0.25
90
55 /41.25, tractor |
Uses:
The plough is used for
primary tillage operation. The plough bottoms are so arranged
that they can be quickly and readily changed to throw the furrow
slice in one direction, usually to the right side by
mechanically/hydraulically operated lever requiring less effort,
time and diesel consumption. Use of this plough avoids
formation of dead furrows, uneven and sunken spots in the field.
Cost of Machine :
Rs.70,000/- |
TOP
|
4.3 DISC PLOUGH |
|
Features:
The plough consists of
common mainframe, disc beam assemblies, rockshaft assembly and a
heavy spring loaded furrow wheel and a gauge wheel. In some
models Disc Plough is designed to operate as 2, 3 or 4 bottoms,
by adding or removing the sub beam assemblies according to
requirement. The disc angle ranges from 40º to 45º to obtain the
desired width of cut and the tilt angle ranges from 15º to 25º
for penetration. The discs of the plough are made of high carbon
steel or alloy steel and the edges are hardened and sharpened.
The discs are mounted on tapered roller bearings. Scrapers
provided prevent soil build up on the discs in sticky soils. The
furrow slice rides along the curvature and is pulverized to some
extent before being thrown. |
Specifications:
Number of furrows opened
Disc size (mm)
Length (mm)
Width (mm)
Height (mm)
Width of cut per disc
(mm)
Adjustable working width
(mm)
Weight (kg)
Output capacity(ha/h)
Power requirement
(hp/kW) |
: 2-4
: 600-800
: 1180-2362
: 889-1194
: 1092-1118
: 200-300
: 600-1200
: up to 3000
: 0.25-0.37
: 25-50/ 17.5-37.5,
tractor depending
upon number of
discs |
Uses:
Disc plough is used for
primary tillage and is especially useful in hard and dry,
trashy, stony or stumpy land conditions and in soil where
scouring is a major problem.
Cost of Machine :
Rs.30,000- 45,000/-
TOP |
|
4.4
TYNE TYPE
CULTIVATOR |
|
Features:
It consists of a frame,
tynes with reversible shovels, hitch system and heavy-duty
springs. The function of spring is to save the cultivator tynes
from breaking when some hard object comes in contact with the
shovel or under the tyne. The shovels are made of heat-treated
steel for longer life. The implement is mounted type and is
controlled by the hydraulic system of the tractor.
Specifications:
|
Length(mm)
Width (mm)
Height (mm)
Number of tynes
Diameter of spring wire
(mm)
Weight (kg)
Output capacity (ha/h)
Source of power (hp/kW)
Uses: |
: 1960-3000
: 970-1560
: 1070-1350
: 7, 9,11 or 13
: 9.5
: 00-350
: 0.5 -0.6
: 35/26.25,
tractor |
Cultivators are used for
seedbed preparation both in dry and wet soils. It is also used
for intercultural operation by adjusting the tynes as per row to
row distance. It is also used for puddling purposes
.
Cost of Machine :
Rs.30,000/-
TOP |
|
4.5
DISC HARROW
|
|
Features:
It
consists of sturdy frame and gangs of discs each mounted
on a common shaft and can be classified into single and double
action (tandem). In tandem disc harrow, the discs on the front
gang throw soil outward and the rear gang inward. Therefore, no
soil remains uncut by the offset disc harrow. Discs are made
from high carbon steel or alloy steel; the cutting edges are
hardened and tempered to suitable hardness. The gangs can be
moved in either direction on the hitch frame. The rear gang can
be moved the same amount as the front gang. When operating in
orchards or plantations, the harrow can be offset to the right
or left, thus enabling soil to be thrown towards or away from
the trees. The offset-feature makes it possible to work under
low–hanging branches of trees. Discs with notches on the outer
rim are also available for operation in weed-infested fields.
Three point hydraulic linkage and hydraulic control makes it
highly maneuverable. It is available as trailed type version. |
Specification:
Length (mm)
Width (mm)
Height (mm)
Number of discs
Diameter of discs (mm)
Pitch of discs:
Weight (kg)
Capacity (ha/day)
Power requirement
(hp/kW) |
: 1980-2260
: 1150-1900
: 1143-1350
: 10-16
: 457-660
: 228-280
: 330-490
: 2.5
: 20-60/15-45,
tractor |
Uses:
Preparation of
soil for sowing, burial of organic substances and remains and to
aerate the soil and eliminate the weeds. It is ideal for field
disking, especially in orchards, plantations and vineyard. It is
suitable for working under trees close to bunds and fence posts.
Cost: Rs.
35,000- 40,000/-
TOP |
4.6
ROTAVATOR |
|
Features:
It consists of a steel
frame, a rotary shaft on which blades are mounted, power
transmission system and gearbox. The blades are of L-type, made
from medium carbon steel or alloy steel, hardened and Tempered
to suitable hardness. The PTO of tractor drives the rotavator.
Rotary motion of the PTO is transmitted to the shaft carrying
the blades through gearbox and transmission system. A good
seedbed and pulverization of the soil is achieved in a single
pass of the rotavator.
|
Specifications:
Length (mm)
Width (mm)
Height (mm)
Working width of
rotavator (mm)
Shape of blade
Thickness of blade (mm)
Total number of flanges
Number of blades per
flange
Diameter of rotor shaft
(mm)
Rotor diameter (mm)
Revolution of rotor
shaft (rpm)
Weight (kg)
Output capacity(h/h)
Power Requirement
(hp/kW)
|
: 1760-2080
: 950-1050
: 935-1110
: 1000-2000
: L-Shape
: 7-10
:: 6-8
: 6
: 70-90
: 420-435
: 210-237
: 280-450
; 0.25-0.26
: 35/26.5 or above,
Tractor
|
Uses:
It is suitable for
preparing seedbed in a single pass both in dry and wetland
conditions. It is also suitable for incorporating straw and
green manure in the field.
Cost of Machine :
Rs.80,000/- |
TOP |
4.7
PADDY HARROW / PUDDLER |
|
Features:
Paddy Harrow is used for
puddling in rice field in wet condition. It consists of two gangs
of disc mounted on a box frame. This is mounted on three point
linkages of tractors and a wooden planker is attached at the
rear-side of the harrow for leveling the field.
|
Specifications:
No. of Gang
Gang Bolt
Distance Between Discs
(mm)
Number of Disc
Disc Diameter (mm)
Type of Discs
Hubs
Width of Cut (mm)
Weight (kg)
Output capacity(ha/h)
Power Required (hp/kW)
|
: Two Nos.
: 2.5 cm Square Solid
Bar
: 52
: 16
: 508
: Plain
: Bracket Spools
: Adjustable
: 262
: 0.35-0.50
: 40-45/30-33.75,
tractor
|
Uses:
It is used for puddling in
wet rice field and gives smooth field quickly.
Cost of Machine :
Rs.20,000/-
TOP |
4.9
BUND FORMER
|
|
Features:
The bund former consists
of mild steel angle iron frame, hitching
system and two blades (wings). The blades are made by
mounting mild steel sheet on an angle iron frame. The blades are
adjusted in converging manner and has wider opening in the front
in comparison at the rear end. The distance between blades can be
adjusted according to size of bund required. The implement is
mounted type and operated in tilled soil.
|
Specifications:
Length (mm)
Width (mm)
Height (mm)
Number of bunds
Capacity (ha/h)
Weight (kg)
Power Required(hp/kW) |
: 1200
: 810
: 1000
: One at a time
: 0.3-0.4
: 53
: 25/18.75, tractor |
Uses:
It is used for making of
bunds in the field.
Cost of Machine :
Rs.20,000/-
TOP |
|